Acrylic Painting Paint 12ml #405

ITALWAX film waxes are an improved version of hot wax. Thanks to special components added to the formula, these waxes have unique properties and advantages.

Works at +42°C, which rules out the possibility of burns.

Applied with a spatula in a thin layer, regardless of hair growth direction.

Precisely follows the contours of the body thanks to its high plasticity, allowing hard-to-reach areas to be treated in a single pass.

Thanks to prolonged heat exposure (5-12 seconds), the wax steams the skin well and grips every hair, even short and coarse ones, before it hardens.

The wax is removed as a film, taking out all hairs together with the roots, leaving no broken hairs, irritation, or redness on the skin.

Economical to use - hair in the underarm area can be removed with a single application. Reduces product consumption by about 30%.

Rules for using ITALWAX film wax:

Heat the wax in a wax heater to +42°C. Treat the depilation area with an alcohol-based lotion. Apply a small amount of talc. Using a spatula, apply a thin layer of wax regardless of hair growth direction, but moving toward yourself, leaving a small tab that you can grip afterward (try to depilate the underarm in a single application).

ATTENTION! Apply unhurriedly, pressing firmly on the spatula with the necessary force.

The wax will harden in 5-6 seconds (wax ready for removal should not stick to your hand when touched). After stretching the skin in the direction opposite to removal, remove the wax with a sharp motion, pulling away from you and parallel to the skin. Repeat the procedure on the next area. After depilation, treat the skin with a soothing, cooling, oil-free product: cooling cream/gel, or White Orchid lotion-emulsion.

Common mistakes when using film wax:

The wax stretches like caramel and is hard to remove.

Cause: the wax has not had time to harden.

Solution: dust the wax with talc, wait 2-3 seconds, and remove it.

Hairs remain after removing the wax.

Cause: the spatula with wax was not pressed firmly enough against the skin, so some hairs did not get caught in the wax layer.

Solution: apply wax again to the area with remaining hairs, pressing the spatula more firmly against the depilation zone.

After removal, wax remains on the skin around the edges of the application.

Cause: uneven wax application.

Solution: form the application with an even layer both in the middle and along the edges.